--- title: "Warehouse Relocation in Draper, UT" url: https://saltlakecitypalletrack.com/service-area/draper/warehouse-relocation description: "Plan warehouse relocation in Draper with owned rack teardown, inspection, phased shipping and reinstallation. Call (801) 942-0493." lang: en --- Image: Warehouse Relocation system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/615d1038-a1fe-486f-9329-ad1a7569f070/reference-pallet-rack-hero.jpg) Draper, Utah # Warehouse Relocation Services in Draper, UT Warehouse relocation in Draper should begin with the rack you already own and the picking work it must support next. For e-commerce fulfillment and last-mile delivery operations near Draper Industrial Park, moving steel without reconsidering pick faces can carry yesterday's congestion into another building. We inventory existing uprights, beams, decking and accessories, then establish what can be dismantled, shipped and reinstalled within a new layout. Your move can combine retained components with new replacements and matched additions instead of treating every bay as a separate purchase. As a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, we coordinate the rack scope around your operating priorities. Experienced installation crews are scheduled and managed for teardown and reassembly, with phased shipping organized around the sections your team is ready to release. (801) 942-0493 ## Rack relocation planned around changing pick demand Start by separating the current rack inventory from the arrangement shown on an old drawing. Record component dimensions, available identification, beam connections and visible condition. That information helps determine which owned materials belong in the receiving building and which require further review before they enter a shipment. A new drawing places retained bays around pallet sizes, replenishment movements and picking activity. Draper fulfillment operations growing into multiple shifts may need different pick-face locations rather than a copy of the previous arrangement. Discuss which products remain accessible during each phase before deciding the order of dismantling. Inspection also establishes the replacement list. Damaged parts are removed from the reuse scope and replaced with new components, not repaired for another installation. Where additional positions are needed, matched additions are selected against the identified rack system and intended loads rather than appearance alone. Current quantities and component identification Destination dimensions and pick-face changes Released teardown and receiving areas Image: Pallet rack rows and beam elevations to review before a relocation (https://saltlakecitypalletrack.com/__l5e/assets-v1/091bfbd9-710e-42f7-bde7-207001f1f01d/reference-pallet-rack-2.jpg) Image: Selective rack frames and decking components for relocation planning (https://saltlakecitypalletrack.com/__l5e/assets-v1/dcf52b64-43ef-4803-8d92-ad83d905fbcf/reference-selective-pallet-rack.jpg) ### Plan the move around Draper picking patterns For consumer goods storage near Sunnyside or Draper Industrial Park, connect rack release decisions to actual picking activity. A useful move plan identifies where retained steel will go, how replacement parts join it and which inventory groups follow each completed installation area. order fulfillment retail distribution consumer goods ## Four controls for phased warehouse relocation 1 ### Identify each released area Mark the bays that operations can empty and assign their components to a destination zone. Keeping the teardown list tied to the new drawing helps prevent usable beams and frames from becoming an untraceable pile during the move. 2 ### Separate inspected materials Distinguish accepted rack from damaged or unresolved pieces before loading. New replacements should appear on the same material schedule as retained components so an installation phase does not depend on steel that was already rejected. 3 ### Ship by assembly need Group frames, beams and supporting pieces according to the receiving sequence. Phased shipping should support complete areas of rack, with clear identification that lets the receiving team distinguish the next installation group from later material. 4 ### Manage installation handoffs Coordinate crew access with unloaded work areas and incoming rack shipments. The reinstallation sequence should reflect which zones can be assembled and checked before inventory returns, while keeping unresolved component questions visible to the project team. ## Pallet rack relocation with room for matched additions The 12300 South corridor and Bangerter Highway provide useful reference points when discussing origin and destination access. For retail distribution, the practical question is which storage sections must move together so replenishment stock does not arrive ahead of its assigned rack. Confirm additions while the retained inventory is being reviewed. Extra beams, replacement frames or another run can change shipment grouping and the new drawing. Recording those decisions before dismantling gives the crew a defined assembly scope rather than a collection of field assumptions. Close each phase by comparing installed bays with the drawing and recording substitutions or outstanding items. Your team should know which sections are ready for its loading process, which materials were replaced and whether later shipments contain remaining owned rack or newly supplied additions. Fulfillment businesses moving owned rack Multi-shift last-mile picking Retail distribution with matched additions Draper storage services: https://saltlakecitypalletrack.com/service-area/draper Relocation service overview: https://saltlakecitypalletrack.com/warehouse-relocation Draper pushback storage: https://saltlakecitypalletrack.com/service-area/draper/pushback-rack Draper pallet flow options: https://saltlakecitypalletrack.com/service-area/draper/pallet-flow-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Bring your existing rack into the conversation Send photographs, rack counts and the receiving building dimensions. We can define a teardown and reinstallation scope that distinguishes owned materials, new replacement parts and additions before you approve the move. (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Draper warehouse relocation questions for shift-based picking ### Can warehouse relocation in Draper accommodate multiple picking shifts? ### Should our Bangerter Highway operation keep its existing rack arrangement? ### What happens to damaged components found during teardown? ### Can additional bays travel with the reused rack? ## Other Storage Services in Draper ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/draper ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://saltlakecitypalletrack.com/service-area/draper/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://saltlakecitypalletrack.com/service-area/draper/pallet-flow-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/draper/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://saltlakecitypalletrack.com/service-area/draper/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/draper/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Warehouse Relocation in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/warehouse-relocation Warehouse Relocation in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/warehouse-relocation Warehouse Relocation in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/warehouse-relocation Warehouse Relocation in Sandy: https://saltlakecitypalletrack.com/service-area/sandy/warehouse-relocation Warehouse Relocation in Murray: https://saltlakecitypalletrack.com/service-area/murray/warehouse-relocation Warehouse Relocation in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/warehouse-relocation View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Warehouse Relocation in Draper? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/draper/warehouse-relocation#service", "url": "https://saltlakecitypalletrack.com/service-area/draper/warehouse-relocation", "name": "Warehouse Relocation in Draper, UT", "serviceType": "Warehouse Relocation", "description": "Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. Design consultation and project planning for Draper, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Draper", "item": "https://saltlakecitypalletrack.com/service-area/draper" }, { "@type": "ListItem", "position": 4, "name": "Warehouse Relocation", "item": "https://saltlakecitypalletrack.com/service-area/draper/warehouse-relocation" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can warehouse relocation in Draper accommodate multiple picking shifts?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. Identify the pick areas each shift needs before releasing rack for dismantling. The drawing and shipment sequence can then reflect those dependencies, although the workable phases depend on available space and your operating requirements." } }, { "@type": "Question", "name": "Should our Bangerter Highway operation keep its existing rack arrangement?", "acceptedAnswer": { "@type": "Answer", "text": "Not automatically. Compare the receiving space with current replenishment and picking movements. Retaining serviceable components can make sense even when beam levels, run locations and pick faces need a different arrangement." } }, { "@type": "Question", "name": "What happens to damaged components found during teardown?", "acceptedAnswer": { "@type": "Answer", "text": "They are separated from reusable materials and specified for new replacement. Documenting the affected pieces keeps them out of installation shipments and allows the replacement order to be matched to the retained system." } }, { "@type": "Question", "name": "Can additional bays travel with the reused rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when the additions have been identified and coordinated with the installation sequence. List them separately from owned components so receiving staff can reconcile both material groups against the same destination drawing." } } ] } ] ```