--- title: "Pallet Flow Rack in Lehi, UT" url: https://saltlakecitypalletrack.com/service-area/lehi/pallet-flow-rack description: "Plan pallet flow rack in Lehi around FIFO rotation, pallet construction, and lane demand. Discuss your loads at (801) 942-0493." lang: en --- Image: Pallet Flow Rack system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/9f4593cc-4ccc-4214-9418-332d93d6cce2/reference-pallet-flow-hero.jpg) Lehi, Utah # Pallet Flow Rack in Lehi, UT Pallet flow rack in Lehi gives high-volume inventory a defined route from receiving to retrieval. Forklifts load one face, pallets travel on inclined gravity rollers, and operators pick from the opposite face. That separation supports first-in, first-out handling without driving trucks into storage lanes, provided stock enters through its designated replenishment side. For technology hardware, healthcare supplies, and consumer brands, the useful starting point is inventory per SKU rather than total warehouse stock. Identify products with repeated pallet quantities and meaningful date sensitivity. A few steady movers may justify dedicated lanes while slower lines remain in directly accessible positions. (801) 942-0493 ## Pallet flow rack rotation begins with lane assignments Assign each lane to a compatible SKU and define any batch restrictions before selecting depth. FIFO describes the physical arrival sequence, not necessarily expiration order. If newer receipts expire earlier, your inventory system must direct placement into a suitable lane instead of assuming gravity will correct the sequence. Estimate working lane length from normal inventory, incoming shipment quantities, and withdrawals between deliveries. Excess depth can strand positions when a product runs low. Too little depth can force receiving staff to stage surplus pallets elsewhere, undermining the intended separation between replenishment and picking. The loading aisle and discharge aisle both need usable truck access. Map pallet approaches, withdrawal movements, and temporary staging at each end. Two working faces occupy floor area, but they also let receiving and order preparation operate without repeatedly sharing the same lane entrance. Pallet underside photographs and weight range Weekly SKU balances and receipt quantities Loading and discharge aisle measurements Image: Pallet flow rack lanes with gravity rollers installed (https://saltlakecitypalletrack.com/__l5e/assets-v1/6c5335a3-ca0d-4ae8-b126-03a89462c6ec/reference-pallet-flow-rack-2.jpg) Image: Flow racking system loaded with pallets at the pick face (https://saltlakecitypalletrack.com/__l5e/assets-v1/e520f702-0f5f-4994-9691-9db8f1f8a6a4/reference-pallet-flow-rack-3.jpg) ### Lehi receiving patterns across Utah County Near Thanksgiving Point and Pioneer Crossing, technology hardware and healthcare distribution can involve very different replenishment rhythms. Use those routes as context for delivery patterns, then size lanes from your own receiving records. This division of Warehouse Equipment & Supplies Co. draws on supplying and installing warehouse equipment since 1997. hardware distribution consumer brands light assembly ## Gravity flow rack checks for actual Lehi loads 1 ### Underside contact Document pallet construction, runner direction, board spacing, and bearing surfaces. Roller placement must suit the underside that actually travels through the lane, including approved alternate pallet styles. 2 ### Condition screening Reject broken boards, projecting fasteners, and loose wrapping before loading. A damaged pallet can interrupt movement and leave following stock unavailable until the obstruction is addressed through the specified procedure. 3 ### Slope and length Select lane slope together with roller characteristics and proposed travel distance. Greater incline is not a universal remedy for hesitation; light and heavy loads need evaluation within the same operating envelope. 4 ### Controlled movement Brakes and speed controllers regulate pallet travel toward the discharge end. Confirm their arrangement against load weights and lane geometry, including the behavior of the lightest expected pallet. ## Pallet flow racking versus one-aisle reserves Pushback serves loading and retrieval from one aisle and follows LIFO within each lane. That can suit interchangeable reserve stock, but it does not provide the same physical sequence for dated healthcare consumables or promotional goods that must move through stock in arrival order. For case picking, distinguish full-pallet replenishment from individual carton presentation. A pallet discharge face can supply a separate carton-flow area, provided the transfer route and replenishment quantities are planned. Do not treat pallet rollers as a substitute for equipment intended to support individual cases. Representative load trials should include full and partial lane occupancy, expected pallet weights, and discharge handling. Check that a removed pallet allows the next load to advance as intended. Establish an isolation and recovery procedure for stalled loads rather than allowing improvised access into occupied lanes. High-volume dated healthcare supplies Repeated consumer-product pallet receipts Steady assembly replenishment inventory Lehi warehouse storage: https://saltlakecitypalletrack.com/service-area/lehi Pallet flow product overview: https://saltlakecitypalletrack.com/products/pallet-flow-rack Lehi pushback comparison: https://saltlakecitypalletrack.com/service-area/lehi/pushback-rack Lehi carton flow picking: https://saltlakecitypalletrack.com/service-area/lehi/carton-flow-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Build a lane plan from your Lehi inventory for pallet flow racking Send representative pallet photographs, SKU balances, date-control rules, and a drawing showing both working faces. We can discuss roller contact, braking, and occupied positions together, then outline the equipment and installation scope around the warehouse activities you need to maintain. (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Lehi pallet flow rack planning questions ### Can a Lehi healthcare distributor rely on FIFO for expiration control? ### What happens when hardware suppliers use different pallets? ### How much stock should a dedicated lane hold? ### Should a Lehi consumer brand put every product into flow lanes? ## Other Storage Services in Lehi ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/lehi ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://saltlakecitypalletrack.com/service-area/lehi/pushback-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/lehi/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://saltlakecitypalletrack.com/service-area/lehi/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/lehi/carton-flow-rack ### Warehouse Relocation Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. View details https://saltlakecitypalletrack.com/service-area/lehi/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Pallet Flow Rack in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/pallet-flow-rack Pallet Flow Rack in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/pallet-flow-rack Pallet Flow Rack in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/pallet-flow-rack Pallet Flow Rack in Sandy: https://saltlakecitypalletrack.com/service-area/sandy/pallet-flow-rack Pallet Flow Rack in Murray: https://saltlakecitypalletrack.com/service-area/murray/pallet-flow-rack Pallet Flow Rack in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/pallet-flow-rack View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Pallet Flow Rack in Lehi? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/lehi/pallet-flow-rack#service", "url": "https://saltlakecitypalletrack.com/service-area/lehi/pallet-flow-rack", "name": "Pallet Flow Rack in Lehi, UT", "serviceType": "Pallet Flow Rack", "description": "Load one side, pick the other, and let gravity enforce first in, first out. Design consultation and project planning for Lehi, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Lehi", "item": "https://saltlakecitypalletrack.com/service-area/lehi" }, { "@type": "ListItem", "position": 4, "name": "Pallet Flow Rack", "item": "https://saltlakecitypalletrack.com/service-area/lehi/pallet-flow-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can a Lehi healthcare distributor rely on FIFO for expiration control?", "acceptedAnswer": { "@type": "Answer", "text": "Only when receipt order matches the required issue sequence. If expiration dates arrive out of order, assign separate lanes or use inventory-directed placement so an earlier-expiring batch does not wait behind later-dated stock." } }, { "@type": "Question", "name": "What happens when hardware suppliers use different pallets?", "acceptedAnswer": { "@type": "Answer", "text": "Evaluate each accepted construction for roller contact and travel behavior. Similar outside dimensions do not establish compatibility. Record approved pallet types and divert unapproved or damaged units before they enter a lane." } }, { "@type": "Question", "name": "How much stock should a dedicated lane hold?", "acceptedAnswer": { "@type": "Answer", "text": "Base depth on recurring SKU balances through the replenishment cycle. Include delivery quantities and low-stock periods; the largest receipt alone can produce lanes that remain partly empty for much of the week." } }, { "@type": "Question", "name": "Should a Lehi consumer brand put every product into flow lanes?", "acceptedAnswer": { "@type": "Answer", "text": "No. Concentrate on repeated, high-volume lines with suitable pallets. Short runs and products needing independent batch selection may fit selective positions better, preserving dedicated lanes for inventory that regularly uses their depth." } } ] } ] ```