--- title: "Cantilever Rack in Murray, UT" url: https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack description: "Arrange Murray long-material storage around tight receiving areas and real load dimensions. Discuss arm layouts at (801) 942-0493." lang: en --- Image: Cantilever Rack system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/3400bbce-eaca-45d3-b6ee-057a84d3f039/reference-cantilever-hero.jpg) Murray, Utah # Cantilever Rack in Murray, UT Cantilever rack in Murray supports long building products on arms attached to uprights. With no front columns between storage positions, a handler can approach lengths that would be awkward inside conventional pallet bays. That open face is useful only when the aisle also accommodates the full load during withdrawal. In a constrained building, preserving the path from receiving to storage matters as much as adding levels. Separate the product survey from assumptions about available space. Measure trim, pipe, bar, and sheet bundles, then identify which materials arrive together but leave as individual pieces. (801) 942-0493 ## Cantilever rack support for mixed building products Arm projection should match the supported depth of the goods, including any packaging that carries weight. Select capacity from the intended loading pattern across arms and uprights. Adding longer arms changes the structural demand and cannot be treated as a simple space adjustment. The distance between uprights depends on the stiffness and length range of the stock. Short remnants may need their own location rather than balancing across supports arranged for full lengths. Sheet products also require attention to sag and surface contact during storage. Consider single-sided placement when only one aisle face is available. A double-sided arrangement can consolidate stock in a central row, provided both faces remain accessible. Include base projections in the drawing so pedestrian paths are not measured from the upright alone. Length ranges including usable offcuts Loaded vehicle travel through receiving Arm and upright documentation for any reused parts Image: Cantilever warehouse racking holding steel tubing (https://saltlakecitypalletrack.com/__l5e/assets-v1/db5a3ca4-a30a-4042-8fc9-c88a255b9541/reference-cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://saltlakecitypalletrack.com/__l5e/assets-v1/ccd152ee-ad3e-4be4-b460-0a4496f61291/reference-cantilever-3b.jpg) ### Fit the storage route to State Street receiving Murray building-product operations around State Street and Vine Street industrial may have limited room for delivery staging. Relating those entrances to the I-15 route helps establish where incoming lengths can wait without occupying the unloading approach. Schedule assembly deliveries around the space receiving actually uses. For Murray cantilever work, we are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. healthcare supply wholesale distribution light assembly ## Four checks for a restricted footprint 1 ### Doorway approach Trace the longest incoming bundle through the doorway and toward its assigned arms. A row that fits on paper may still prevent the truck from aligning its load. 2 ### Working elevations Set arm levels around bundle thickness, fork clearance, and visibility. Closely spaced levels add little value if operators cannot place or retrieve the goods cleanly. 3 ### Outdoor alternatives Moving suitable material outside may release indoor space, but exposure, drainage, ground conditions, and the proposed finish all need review before choosing that location. 4 ### Receiving sequence Define where unloaded material waits while lengths and labels are checked. Keep that temporary position separate from a travel aisle used by other deliveries. ## Use cantilever racking where open access matters Building materials with irregular lengths often benefit from arms because there are no front posts dividing the loading face. Palletized wholesale goods generally belong in selective rack when individual pallet access is the primary requirement. Avoid converting every product family to the same storage method. Compare a standard forklift approach with side-loader travel using your real turning constraints. The vehicle must carry the longest bundle without sweeping through adjoining work areas. Changing the handling method can alter the preferred row direction as well as the required aisle width. Keep removal order visible when several lengths share a level. Place frequently selected material where it can be reached without first shifting unrelated bundles. Review the load schedule whenever purchasing changes pack sizes, since familiar product names can conceal different weights and support needs. Wholesale pipe and bar inventories Trim and building-product bundles Sheet stock needing distributed support Murray warehouse storage: https://saltlakecitypalletrack.com/service-area/murray Cantilever product overview: https://saltlakecitypalletrack.com/products/cantilever-rack Murray pallet flow rack: https://saltlakecitypalletrack.com/service-area/murray/pallet-flow-rack Murray drive-in rack: https://saltlakecitypalletrack.com/service-area/murray/drive-in-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Plan Murray cantilever rack placement Provide a floor sketch showing doors, columns, existing storage, and the area reserved for deliveries. Add photographs of your longest and deepest loads. A useful review connects support spacing with the movement needed to reach it, rather than offering an isolated row count. (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Murray cantilever racking questions ### How can Murray sites with tight lots plan installation staging? ### Could a Vine Street building use a wall-side row? ### Should short pipe remnants stay with full lengths? ### Does a higher arm rating allow any bundle depth? ## Other Storage Services in Murray ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/murray ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://saltlakecitypalletrack.com/service-area/murray/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://saltlakecitypalletrack.com/service-area/murray/pallet-flow-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/murray/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/murray/carton-flow-rack ### Warehouse Relocation Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. View details https://saltlakecitypalletrack.com/service-area/murray/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Cantilever Rack in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/cantilever-rack Cantilever Rack in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/cantilever-rack Cantilever Rack in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/cantilever-rack Cantilever Rack in Sandy: https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack Cantilever Rack in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/cantilever-rack Cantilever Rack in Provo: https://saltlakecitypalletrack.com/service-area/provo/cantilever-rack View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Murray? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack#service", "url": "https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack", "name": "Cantilever Rack in Murray, UT", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. Design consultation and project planning for Murray, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Murray", "item": "https://saltlakecitypalletrack.com/service-area/murray" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How can Murray sites with tight lots plan installation staging?", "acceptedAnswer": { "@type": "Answer", "text": "Identify the receiving windows and available unloading area first. Divide material placement and assembly work so rack components do not occupy the only route for incoming stock." } }, { "@type": "Question", "name": "Could a Vine Street building use a wall-side row?", "acceptedAnswer": { "@type": "Answer", "text": "A single-sided assembly may suit that arrangement if its base, load projection, and working aisle fit. Proximity to a wall does not establish structural suitability." } }, { "@type": "Question", "name": "Should short pipe remnants stay with full lengths?", "acceptedAnswer": { "@type": "Answer", "text": "Only when each piece has adequate support and can be retrieved without shifting unstable stock. A separate remnant location often makes length identification easier." } }, { "@type": "Question", "name": "Does a higher arm rating allow any bundle depth?", "acceptedAnswer": { "@type": "Answer", "text": "No. Usable arm length, load placement, upright limits, and the complete assembly still govern selection. Evaluate depth and weight together before assigning a location." } } ] } ] ```