--- title: "Cantilever Rack in Orem, UT" url: https://saltlakecitypalletrack.com/service-area/orem/cantilever-rack description: "Cantilever rack for Orem's tech, assembly, and distribution buildings. Arms sized to your stock, layouts drawn free: (801) 942-0493." lang: en --- Image: Cantilever Rack system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/3400bbce-eaca-45d3-b6ee-057a84d3f039/reference-cantilever-hero.jpg) Orem, Utah # Cantilever Rack in Orem, UT Cantilever rack in Orem gives extrusions, bar stock, tubing, and crating lumber an open loading face with no front columns in the way. Arms reach out from a single line of uprights, so a forklift or side-loader sets long material straight onto the support points. That suits the metal and packaging stock moving through Orem's light assembly and component distribution buildings. The starting point is the material itself: the longest piece, the heaviest bundle, and how it arrives banded. An electronics assembler along University Parkway stores different stock than a fabrication supplier on Geneva Road, and the arm layout should reflect that difference before any steel is ordered. (801) 942-0493 ## How cantilever racking carries long loads A row of this type is a line of upright columns on heavy bases, with arms bolted or pinned at each storage level. Because nothing stands in front of the load, material can overhang the arm ends within the design allowance and still sit stable. That open face is what separates it from pallet rack with front posts. Arm length follows load depth, and arm capacity follows the actual bundle weight, not an average guessed from a catalog page. Rate each arm for the heaviest load it will carry, then check the upright and base reactions for the full row. Uneven bundles concentrate weight, so the drawing should show real load positions. Upright spacing depends on material stiffness. Straight bar and rigid conduit tolerate wider gaps than flexible tube or thin sheet, which can sag between arms and become hard to lift out. Where sheet packs need support, a deck over the arms is evaluated with the rack rather than improvised later. Free warehouse consultation Layout drawing with arm and column schedule Installation by experienced crews we schedule and manage Image: Cantilever warehouse racking holding steel tubing (https://saltlakecitypalletrack.com/__l5e/assets-v1/db5a3ca4-a30a-4042-8fc9-c88a255b9541/reference-cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://saltlakecitypalletrack.com/__l5e/assets-v1/ccd152ee-ad3e-4be4-b460-0a4496f61291/reference-cantilever-3b.jpg) ### Orem operations we design around From the Orem Tech Park to Geneva Road and the University Parkway corridor, we lay out these systems for tech assemblers, medical device makers, and component distributors across Utah County. electronics distribution light assembly component supply ## Planning cantilever storage rack for an Orem building 1 ### Measure the clear height Many Orem buildings along State Street and the tech corridor run 20 to 28 feet clear. Column height, arm levels, and lift-truck mast height all have to agree within that envelope. 2 ### Match the access method Counterbalance forklifts need wider aisles than side-loaders. Where stock runs long, a side-loader or multi-directional truck can cut aisle width and add rows. 3 ### Single or double sided Single-sided rows fit along walls; double-sided rows serve two aisles from one column line. Compare both against the stock list before assigning floor area. 4 ### Indoor or outdoor Galvanized arms and columns handle yard storage for lumber and pipe. Indoor painted steel suits finished extrusions and materials that should stay clean and dry. ## Where cantilever rack fits in Orem operations Orem's mix of technology hardware, medical device assembly, and light manufacturing generates long stock: aluminum extrusions, tubing, threaded rod, crating lumber, and sheet. This rack keeps that material off the floor, sorted by length, and reachable without breaking down bundles. Against selective pallet rack, this system wins whenever the load is longer than a pallet opening or awkward to bridge across beams. For palletized goods, selective or pallet flow remains the better tool, and many Orem buildings run both, with arms along a wall and pallet rack in the center. Salt Lake Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing rack since 1997. We design the layout, quote the steel, and schedule experienced installation crews we manage. Bar, pipe, tube, and extrusions Lumber, sheet goods, and crating stock Furniture and oversized items Yard storage with galvanized steel Buildings mixing long stock and pallets Orem service area: https://saltlakecitypalletrack.com/service-area/orem Cantilever rack systems: https://saltlakecitypalletrack.com/products/cantilever-rack Pallet flow rack in Orem: https://saltlakecitypalletrack.com/service-area/orem/pallet-flow-rack Drive-in rack in Orem: https://saltlakecitypalletrack.com/service-area/orem/drive-in-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Get a cantilever rack quote for your Orem building Send your material list and building dimensions and we will follow up with a layout and pricing. Prefer to talk it through? Call (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Cantilever rack questions from Orem buyers ### Can cantilever rack hold aluminum extrusions for our Orem assembly plant? ### How much weight can one cantilever arm carry? ### Will this rack fit our older State Street building? ### Can we store lumber outdoors at our Geneva Road yard? ## Other Storage Services in Orem ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/orem ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://saltlakecitypalletrack.com/service-area/orem/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://saltlakecitypalletrack.com/service-area/orem/pallet-flow-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/orem/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/orem/carton-flow-rack ### Warehouse Relocation Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. View details https://saltlakecitypalletrack.com/service-area/orem/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Cantilever Rack in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/cantilever-rack Cantilever Rack in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/cantilever-rack Cantilever Rack in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/cantilever-rack Cantilever Rack in Sandy: https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack Cantilever Rack in Murray: https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack Cantilever Rack in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/cantilever-rack View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Orem? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/orem/cantilever-rack#service", "url": "https://saltlakecitypalletrack.com/service-area/orem/cantilever-rack", "name": "Cantilever Rack in Orem, UT", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. Design consultation and project planning for Orem, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Orem", "item": "https://saltlakecitypalletrack.com/service-area/orem" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://saltlakecitypalletrack.com/service-area/orem/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can cantilever rack hold aluminum extrusions for our Orem assembly plant?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, extrusions are one of the most common cantilever loads. We size arm spacing to the extrusion length and wall thickness so bundles stay straight, and add stop pins or end lips where loose pieces could roll off." } }, { "@type": "Question", "name": "How much weight can one cantilever arm carry?", "acceptedAnswer": { "@type": "Answer", "text": "It depends on the arm length, profile, and how the load sits. Arms are rated per arm under a stated loading pattern, so we confirm your actual bundle weights before quoting rather than giving one number." } }, { "@type": "Question", "name": "Will this rack fit our older State Street building?", "acceptedAnswer": { "@type": "Answer", "text": "Usually, yes. Older Orem buildings with 20 to 28 feet of clear height take cantilever columns well; we measure the clear height, floor condition, and door positions before recommending column height and arm levels." } }, { "@type": "Question", "name": "Can we store lumber outdoors at our Geneva Road yard?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, with galvanized columns and arms that stand up to Utah County winters. Outdoor rows can carry roof options in some layouts, and we plan the aisle for the truck that will actually load it." } } ] } ] ```