--- title: "Pushback Rack in Orem, UT" url: https://saltlakecitypalletrack.com/service-area/orem/pushback-rack description: "Review Orem component reserves, pallet support, and LIFO lane assignments before choosing depth. Call (801) 942-0493." lang: en --- Image: Pushback Rack system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/6b563dbf-6b79-40c0-ad59-c65b757df8cc/reference-pushback-hero.jpg) Orem, Utah # Pushback Rack in Orem, UT Pushback rack in Orem can separate full-pallet component reserves from the individual access required at assembly and picking stations. Nested carts run on inclined rails, commonly accommodating 2–6 pallets deep. Several loads share one aisle-facing lane, reducing aisle requirements while leaving the lift truck outside the rack during placement and retrieval. Electronics and medical-device inventory demands more thought than grouping matching cartons. Lot identity, revision changes, and production release rules can make otherwise identical pallets noninterchangeable. Establish those restrictions before assigning lanes, because a compact reserve block cannot provide independent access to a pallet stored behind another load. (801) 942-0493 ## Pushback pallet rack begins with pallet and load checks Cart contact must match the pallet underside. Measure dimensions and inspect bottom boards, openings, condition, and any wrapping that extends below the load. A pallet suitable for another storage arrangement is not automatically suitable for movement on the proposed carts and rails. Beam and frame sizing follows actual loaded pallet weights, the number of supported lanes, and the proposed elevations. Component distributors should distinguish dense inputs from lighter finished assemblies rather than using one average weight. Document the maximum allowed load for each intended storage assignment. Existing rack additions require a separate compatibility assessment. Identify the manufacturer and components, inspect their condition, and review connections and available capacity. Similar colors or beam lengths do not demonstrate that an older bay can accept the loads and geometry of a new moving-cart system. Pallet underside and load records Revision and batch access requirements SKU quantities between assembly withdrawals Image: High-density pushback rack lanes loaded with pallets (https://saltlakecitypalletrack.com/__l5e/assets-v1/25c52956-fa3e-4a70-9b86-5d6d7b432c02/reference-pushback-2.jpg) Image: Pushback pallet racking showing cart rails and load beams (https://saltlakecitypalletrack.com/__l5e/assets-v1/2682a51c-f4c5-433d-8ae1-5504d0d49690/reference-pushback-3.jpg) ### Orem component storage tied to production demand Around Orem Tech Park and Geneva Road, electronics distribution and light assembly can require reserve lanes organized by production demand rather than carton appearance. Keep controlled medical-device lots independently accessible when their handling rules require it. Utah County transfers among Orem, Lehi, Provo, and Spanish Fork also need receiving space that does not become permanent overflow. Our division belongs to Warehouse Equipment & Supplies Co., which has been supplying and installing warehouse equipment since 1997. electronics distribution light assembly component supply ## Push back racking inventory controls 1 ### Revision separation Decide whether different product revisions may share a retrieval sequence. Where production requires a particular revision, provide separately accessible lanes or place those pallets in another storage area. 2 ### Depth selection Choose lane depth from actual pallets per SKU across routine production cycles. Count the inventory left after replenishment to assembly, not simply the quantity unloaded at receiving. 3 ### Lane identification Give each lane a clear address that matches inventory records. Establish how operators record the stock behind the visible pallet, including batch information when the operation requires it. 4 ### Handling envelope Check the loaded truck approach, lifting range, and placement clearances. Attachments and packaging overhang can change the working space even though the truck stays in the aisle. ## Pushback rack rotation and alternative storage New receipts push earlier loads back along the lane, producing last-in, first-out retrieval. As the front load is removed in accordance with system instructions, gravity brings the remaining pallets forward. Treat this LIFO behavior as an inventory constraint, not something barcode labels can reverse. Selective rack is preferable when each pallet needs independent access or most SKUs occupy only a small quantity. Drive-in storage offers another dense reserve approach but requires truck entry. Pushback rack allows lane-by-lane aisle access without making the pallets within each lane individually selectable. FIFO pallet flow uses loading and discharge at opposite ends to support first-in, first-out movement. Consider it for dated or sequence-controlled inventory when the building can accommodate both access faces. Production replenishment may justify different systems for common inputs, controlled lots, and finished goods. Common electronics inputs Packaged assembly reserves Repeated component replenishment Orem warehouse storage: https://saltlakecitypalletrack.com/service-area/orem Pushback product overview: https://saltlakecitypalletrack.com/products/pushback-rack Orem pallet flow alternatives: https://saltlakecitypalletrack.com/service-area/orem/pallet-flow-rack Orem drive-in comparison: https://saltlakecitypalletrack.com/service-area/orem/drive-in-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Plan Orem pushback rack around your components Share pallet specifications, load weights, product revision rules, and an inventory history covering replenishment cycles. Add the rack identification if an extension is proposed. We will use those inputs to compare lane assignments and equipment requirements, then discuss how material staging and installation could coexist with production supply. (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Orem reserve-storage questions ### Can medical-device lots use the same lane? ### How does pushback rack support barcode inventory? ### What determines lane depth for an Orem assembly supplier? ### Will all incoming pallet styles fit the carts? ## Other Storage Services in Orem ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/orem ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://saltlakecitypalletrack.com/service-area/orem/pallet-flow-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/orem/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://saltlakecitypalletrack.com/service-area/orem/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/orem/carton-flow-rack ### Warehouse Relocation Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. View details https://saltlakecitypalletrack.com/service-area/orem/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Pushback Rack in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/pushback-rack Pushback Rack in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/pushback-rack Pushback Rack in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/pushback-rack Pushback Rack in Sandy: https://saltlakecitypalletrack.com/service-area/sandy/pushback-rack Pushback Rack in Murray: https://saltlakecitypalletrack.com/service-area/murray/pushback-rack Pushback Rack in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/pushback-rack View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Pushback Rack in Orem? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/orem/pushback-rack#service", "url": "https://saltlakecitypalletrack.com/service-area/orem/pushback-rack", "name": "Pushback Rack in Orem, UT", "serviceType": "Pushback Rack", "description": "Two to six pallets deep from one aisle, without giving up much reach. Design consultation and project planning for Orem, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Orem", "item": "https://saltlakecitypalletrack.com/service-area/orem" }, { "@type": "ListItem", "position": 4, "name": "Pushback Rack", "item": "https://saltlakecitypalletrack.com/service-area/orem/pushback-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can medical-device lots use the same lane?", "acceptedAnswer": { "@type": "Answer", "text": "They can only when lot retrieval rules allow the resulting LIFO sequence. If a specific lot must remain available regardless of later receipts, separate it into another lane or use independently accessible storage. Product similarity alone does not settle that decision." } }, { "@type": "Question", "name": "How does pushback rack support barcode inventory?", "acceptedAnswer": { "@type": "Answer", "text": "It provides defined lane locations that can be represented in an inventory system. The operation must still track the pallets behind the visible load and enforce correct assignments. Scanning helps identify stock but does not change its physical retrieval order." } }, { "@type": "Question", "name": "What determines lane depth for an Orem assembly supplier?", "acceptedAnswer": { "@type": "Answer", "text": "The useful depth comes from pallets per SKU remaining between production withdrawals, adjusted for any revision or batch separation. Review low inventory periods alongside receipt peaks. A deeper arrangement is not helpful when assigned components rarely occupy its rear positions." } }, { "@type": "Question", "name": "Will all incoming pallet styles fit the carts?", "acceptedAnswer": { "@type": "Answer", "text": "No assumption should be made across different pallet constructions. Check each accepted style for contact, dimensions, condition, and loaded behavior. If suppliers use incompatible pallets, address that receiving issue before counting their loads as available capacity in the proposed lanes." } } ] } ] ```