--- title: "Cantilever Rack in Sandy, UT" url: https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack description: "Plan Sandy storage for tube, bar, and assembly materials with load-led arm spacing. Call (801) 942-0493 to review access." lang: en --- Image: Cantilever Rack system inside a Utah warehouse (https://saltlakecitypalletrack.com/__l5e/assets-v1/3400bbce-eaca-45d3-b6ee-057a84d3f039/reference-cantilever-hero.jpg) Sandy, Utah # Cantilever Rack in Sandy, UT Cantilever rack in Sandy creates open-front storage for lengths used in assembly and component supply. Horizontal arms carry material back to vertical uprights, leaving the loading face free of front columns. This can simplify access to tube, bar, and sheet stock that does not belong in a pallet-sized opening. For a new flex space, define the material route before filling the empty floor with rows. Incoming raw stock, part preparation, and finished goods may need different handling paths. A clear storage brief distinguishes full bundles from the smaller quantities released to a workstation. (801) 942-0493 ## Cantilever rack selection for assembly stock Begin with the bearing needs of each material rather than selecting arms by appearance. Arm length must suit the load depth, while capacity must account for weight distribution and the specified position of that weight. Upright loading must be checked across the proposed levels. Flexible bar and thin-wall tube can deflect between supports. Establish upright spacing using the actual section, length, and bundle behavior, including partly depleted packs. Sheet material may need additional support surfaces selected for its orientation and sensitivity to marking. Single-sided rows can define the edge of a material preparation area. Double-sided storage may serve two work zones, but only if both aisles support the intended handling movements. Do not assign the rear face to stock that cannot be reached during normal production. Raw-stock sections and bundle dimensions Preparation-area position and transfer method Clear heights, door openings, and floor obstructions Image: Cantilever warehouse racking holding steel tubing (https://saltlakecitypalletrack.com/__l5e/assets-v1/db5a3ca4-a30a-4042-8fc9-c88a255b9541/reference-cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://saltlakecitypalletrack.com/__l5e/assets-v1/ccd152ee-ad3e-4be4-b460-0a4496f61291/reference-cantilever-3b.jpg) ### Coordinate Sandy Industrial Park material movement Light assembly in Sandy Industrial Park or along the 9000 South corridor needs storage tied to workstation access, not merely the route from I-15. In a newly occupied flex building, confirm door use and preparation space before fixing row orientation. For Sandy cantilever work, we are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. medical supplies component distribution light assembly ## Details worth settling before move-in 1 ### Load records List dimensions and weights by material family. Include packaging, dunnage, and the smallest remaining quantity so the support plan covers more than newly delivered bundles. 2 ### Vehicle selection A forklift and a side-loader present long material differently. Compare their loaded travel envelopes with the proposed aisles and the approach to each workstation. 3 ### Surface protection Choose bearing arrangements that suit the material finish. Separate bare stock from pieces needing protective contact, and avoid assuming that every bundle can share the same arm surface. 4 ### Location environment Indoor positions can suit moisture-sensitive components. For outdoor material, review exposure protection, finish selection, and the supporting surface before transferring stock out of the building. ## Connect cantilever racking with production supply Long raw material benefits from a clear loading face, while boxed components on pallets often remain better suited to selective rack. Use the two systems according to their handling roles. The transfer point between bulk storage and assembly should be visible in the layout. Allow space to split a bundle before individual pieces move to preparation. Opening packs directly in a busy retrieval aisle can interfere with the next movement. Establish a defined work position with suitable support for the material being separated. Level assignments should reflect withdrawal frequency as well as available height. Keep identification readable when similar sections occupy neighboring arms. If production changes from full lengths to prepared blanks, reassess support spacing and location sizes instead of preserving an obsolete arrangement. Tube feeding light assembly Bar stock for component preparation Sheet bundles with planned bearing surfaces Sandy warehouse storage: https://saltlakecitypalletrack.com/service-area/sandy Cantilever product overview: https://saltlakecitypalletrack.com/products/cantilever-rack Sandy pallet flow rack: https://saltlakecitypalletrack.com/service-area/sandy/pallet-flow-rack Sandy drive-in rack: https://saltlakecitypalletrack.com/service-area/sandy/drive-in-rack Call (801) 942-0493: (801) 942-0493 ## Recent Installations Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front. Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://saltlakecitypalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://saltlakecitypalletrack.com/projects ## Plan Sandy cantilever rack placement Share the proposed assembly layout alongside your material list and handling equipment specifications. Mark where packs are opened and where cut pieces return. We can examine storage faces, support requirements, and transfer space as one plan rather than treating raw-material storage as leftover floor area. (801) 942-0493. ### Salt Lake Pallet Rack 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 (801) 942-0493 Monday - Friday: 8:00 AM - 6:00 PM ## Sandy cantilever racking questions ### What should Sandy assembly teams document before occupying a shell? ### How should a 9000 South site separate components from long stock? ### Can thin tube use the same spacing as solid bar? ### Is outdoor storage appropriate for assembly materials? ## Other Storage Services in Sandy ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://saltlakecitypalletrack.com/service-area/sandy ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://saltlakecitypalletrack.com/service-area/sandy/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://saltlakecitypalletrack.com/service-area/sandy/pallet-flow-rack ### Drive-In Rack Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles. View details https://saltlakecitypalletrack.com/service-area/sandy/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://saltlakecitypalletrack.com/service-area/sandy/carton-flow-rack ### Warehouse Relocation Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building. View details https://saltlakecitypalletrack.com/service-area/sandy/warehouse-relocation ## Nearby Areas We Also Serve Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company. Cantilever Rack in Salt Lake City: https://saltlakecitypalletrack.com/service-area/salt-lake-city/cantilever-rack Cantilever Rack in West Valley City: https://saltlakecitypalletrack.com/service-area/west-valley-city/cantilever-rack Cantilever Rack in West Jordan: https://saltlakecitypalletrack.com/service-area/west-jordan/cantilever-rack Cantilever Rack in Murray: https://saltlakecitypalletrack.com/service-area/murray/cantilever-rack Cantilever Rack in Ogden: https://saltlakecitypalletrack.com/service-area/ogden/cantilever-rack Cantilever Rack in Provo: https://saltlakecitypalletrack.com/service-area/provo/cantilever-rack View All Service Areas: https://saltlakecitypalletrack.com/service-area ## Where We Work Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions. ### Salt Lake Pallet Rack #### Address 3556 S 5600 W Suite #1-1293 Salt Lake City, UT 84120 #### Phone (801) 942-0493 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Sandy? Call (801) 942-0493 or request a quote and we will get a layout started. (801) 942-0493 Tap to Call: (801) 942-0493 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://saltlakecitypalletrack.com/#business", "name": "Salt Lake Pallet Rack", "url": "https://saltlakecitypalletrack.com", "telephone": "(801) 942-0493", "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" }, "address": { "@type": "PostalAddress", "streetAddress": "3556 S 5600 W, Suite #1-1293", "addressLocality": "Salt Lake City", "addressRegion": "UT", "postalCode": "84120", "addressCountry": "US" }, "areaServed": [ { "@type": "City", "name": "Salt Lake City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Valley City", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "West Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Murray", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Ogden", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Provo", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Orem", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Layton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Lehi", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Draper", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "South Jordan", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Riverton", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Bountiful", "containedInPlace": { "@type": "State", "name": "Utah" } }, { "@type": "City", "name": "Tooele", "containedInPlace": { "@type": "State", "name": "Utah" } } ], "hasMap": "https://www.google.com/maps?q=Salt+Lake+Pallet+Rack%2C+3556+S+5600+W+Suite+%231-1293%2C+Salt+Lake+City%2C+UT+84120&z=15&output=embed" }, { "@type": "Service", "@id": "https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack#service", "url": "https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack", "name": "Cantilever Rack in Sandy, UT", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. Design consultation and project planning for Sandy, Utah businesses.", "provider": { "@id": "https://saltlakecitypalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Sandy", "containedInPlace": { "@type": "State", "name": "Utah" } } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://saltlakecitypalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://saltlakecitypalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Sandy", "item": "https://saltlakecitypalletrack.com/service-area/sandy" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://saltlakecitypalletrack.com/service-area/sandy/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What should Sandy assembly teams document before occupying a shell?", "acceptedAnswer": { "@type": "Answer", "text": "Record usable dimensions, receiving doors, workstation positions, and raw-material loads. Those details allow storage and material preparation to be planned together before equipment takes the remaining space." } }, { "@type": "Question", "name": "How should a 9000 South site separate components from long stock?", "acceptedAnswer": { "@type": "Answer", "text": "Assign boxed components to suitable pallet or shelf locations, then reserve open-arm positions for lengths. Connect them through a defined transfer route rather than a shared staging pile." } }, { "@type": "Question", "name": "Can thin tube use the same spacing as solid bar?", "acceptedAnswer": { "@type": "Answer", "text": "Not automatically. Section stiffness and bundle restraint differ, so both full and partly used packs need review before selecting the distance between supports." } }, { "@type": "Question", "name": "Is outdoor storage appropriate for assembly materials?", "acceptedAnswer": { "@type": "Answer", "text": "Suitability depends on corrosion sensitivity, packaging, and exposure. Keep materials requiring controlled protection inside unless the proposed outdoor arrangement addresses their actual storage requirements." } } ] } ] ```