Pallet Flow Rack in Bountiful, UT
Pallet flow rack in Bountiful gives food distributors and wholesalers handling repeated pallets of date-sensitive products a defined receiving-to-picking sequence. Operators load one face, retrieve from the opposite face, and keep incoming stock behind earlier receipts within each assigned lane. Consistent assignments make the physical queue useful to dispatch rather than merely adding positions.
Begin with the products that move in substantial quantities every week. A high-volume SKU can justify dedicated depth; a slow item with occasional bulk deliveries may leave much of its lane empty. Review normal inventory, receipt sizes, and shelf-life requirements before deciding how many positions belong behind each pick opening.
Pallet flow rack for date-sensitive replenishment
Gravity rollers support pallets on a calculated slope, allowing loads to advance toward the discharge end as stock is removed. Brakes and speed controllers regulate that movement. Their selection must account for the lightest and heaviest operating loads rather than assuming every pallet will travel alike.
FIFO describes the order within a correctly operated lane, not an automatic warehouse-wide expiration policy. If two lanes contain the same SKU, staff still need a rule for selecting the earlier receipt or required date. Receiving records and visible lane identification connect physical movement to inventory rotation.
Separate loading and picking aisles are part of the footprint. Draw both working faces with truck approaches, turning movements, and temporary staging shown. A dense block loses its operational value if receiving pallets occupy the space needed to remove loads from the opposite side.
North I-15 access and Bountiful receiving patterns
Bountiful's position along north I-15 makes delivery patterns relevant to storage planning, but internal handling determines the lane arrangement. For food and wholesale operations around West Bountiful industrial and the 500 West corridor, compare receiving batches with daily dispatch quantities. Preserve room for inspection before pallets enter gravity lanes. We are a division of Warehouse Equipment & Supplies Co., which has supplied and installed warehouse equipment since 1997.
Gravity flow rack checks for actual pallets
Bottom-board contact
Document pallet construction, runner direction, and contact surfaces. Roller spacing must support the underside throughout travel, including transitions at entry and discharge.
Condition screening
Identify broken boards, protruding fasteners, sagging decks, and wrapping beneath the pallet. Establish a rejection process before unsuitable pallets reach the loading face.
Travel control
Select brakes and speed controllers around weight variation and pallet behavior. Do not increase slope simply to force a damaged or incompatible pallet forward.
Lane length
Match depth to recurring pallets per SKU and replenishment frequency. Include the vertical fall created by the selected slope when checking available storage elevations.
Pallet flow racking versus same-face storage
Pushback uses a shared loading and retrieval face and follows LIFO within each lane. It can suit products whose rotation rules allow newer stock to leave first. Gravity-fed FIFO storage instead reserves access on opposite sides and is more appropriate when receipt sequence has operational importance.
Avoid assigning one deep lane to unrelated products merely to fill openings. A needed pallet can remain behind another SKU even when the lane advances normally. Use separate lanes for distinct products and additional divisions when lots, ownership, or handling restrictions require independent release.
Evaluate a representative range of pallets before accepting a lane arrangement. Observe entry alignment, controlled travel, discharge positioning, and behavior after the leading load is removed. Record the approved pallet characteristics so a later packaging change triggers review rather than an unexplained handling problem.
Recent Installations
Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front.
Build a lane plan around your replenishment cycle
Request a pallet flow rack review with SKU counts, weight ranges, pallet photographs, and a marked floor plan. Include unusually light loads and returned pallets rather than only standard receipts. We can discuss lane assignments, component scope, and installation work areas while keeping receiving and picking access visible in the proposed arrangement. (801) 942-0493.
Salt Lake Pallet Rack
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
(801) 942-0493Monday - Friday: 8:00 AM - 6:00 PM
Bountiful pallet flow rack planning questions
Other Storage Services in Bountiful
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Drive-In Rack
Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles.
View details
Cantilever Rack
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company.
Where We Work
Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions.
Salt Lake Pallet Rack
Address
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
Phone
(801) 942-0493Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Pallet Flow Rack in Bountiful?
Call (801) 942-0493 or request a quote and we will get a layout started.