Cantilever Rack in Sandy, UT
Cantilever rack in Sandy creates open-front storage for lengths used in assembly and component supply. Horizontal arms carry material back to vertical uprights, leaving the loading face free of front columns. This can simplify access to tube, bar, and sheet stock that does not belong in a pallet-sized opening.
For a new flex space, define the material route before filling the empty floor with rows. Incoming raw stock, part preparation, and finished goods may need different handling paths. A clear storage brief distinguishes full bundles from the smaller quantities released to a workstation.
Cantilever rack selection for assembly stock
Begin with the bearing needs of each material rather than selecting arms by appearance. Arm length must suit the load depth, while capacity must account for weight distribution and the specified position of that weight. Upright loading must be checked across the proposed levels.
Flexible bar and thin-wall tube can deflect between supports. Establish upright spacing using the actual section, length, and bundle behavior, including partly depleted packs. Sheet material may need additional support surfaces selected for its orientation and sensitivity to marking.
Single-sided rows can define the edge of a material preparation area. Double-sided storage may serve two work zones, but only if both aisles support the intended handling movements. Do not assign the rear face to stock that cannot be reached during normal production.
Coordinate Sandy Industrial Park material movement
Light assembly in Sandy Industrial Park or along the 9000 South corridor needs storage tied to workstation access, not merely the route from I-15. In a newly occupied flex building, confirm door use and preparation space before fixing row orientation. For Sandy cantilever work, we are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997.
Details worth settling before move-in
Load records
List dimensions and weights by material family. Include packaging, dunnage, and the smallest remaining quantity so the support plan covers more than newly delivered bundles.
Vehicle selection
A forklift and a side-loader present long material differently. Compare their loaded travel envelopes with the proposed aisles and the approach to each workstation.
Surface protection
Choose bearing arrangements that suit the material finish. Separate bare stock from pieces needing protective contact, and avoid assuming that every bundle can share the same arm surface.
Location environment
Indoor positions can suit moisture-sensitive components. For outdoor material, review exposure protection, finish selection, and the supporting surface before transferring stock out of the building.
Connect cantilever racking with production supply
Long raw material benefits from a clear loading face, while boxed components on pallets often remain better suited to selective rack. Use the two systems according to their handling roles. The transfer point between bulk storage and assembly should be visible in the layout.
Allow space to split a bundle before individual pieces move to preparation. Opening packs directly in a busy retrieval aisle can interfere with the next movement. Establish a defined work position with suitable support for the material being separated.
Level assignments should reflect withdrawal frequency as well as available height. Keep identification readable when similar sections occupy neighboring arms. If production changes from full lengths to prepared blanks, reassess support spacing and location sizes instead of preserving an obsolete arrangement.
Recent Installations
Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front.
Plan Sandy cantilever rack placement
Share the proposed assembly layout alongside your material list and handling equipment specifications. Mark where packs are opened and where cut pieces return. We can examine storage faces, support requirements, and transfer space as one plan rather than treating raw-material storage as leftover floor area. (801) 942-0493.
Salt Lake Pallet Rack
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
(801) 942-0493Monday - Friday: 8:00 AM - 6:00 PM
Sandy cantilever racking questions
Other Storage Services in Sandy
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company.
Where We Work
Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions.
Salt Lake Pallet Rack
Address
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
Phone
(801) 942-0493Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Cantilever Rack in Sandy?
Call (801) 942-0493 or request a quote and we will get a layout started.