Cantilever Rack in Murray, UT
Cantilever rack in Murray supports long building products on arms attached to uprights. With no front columns between storage positions, a handler can approach lengths that would be awkward inside conventional pallet bays. That open face is useful only when the aisle also accommodates the full load during withdrawal.
In a constrained building, preserving the path from receiving to storage matters as much as adding levels. Separate the product survey from assumptions about available space. Measure trim, pipe, bar, and sheet bundles, then identify which materials arrive together but leave as individual pieces.
Cantilever rack support for mixed building products
Arm projection should match the supported depth of the goods, including any packaging that carries weight. Select capacity from the intended loading pattern across arms and uprights. Adding longer arms changes the structural demand and cannot be treated as a simple space adjustment.
The distance between uprights depends on the stiffness and length range of the stock. Short remnants may need their own location rather than balancing across supports arranged for full lengths. Sheet products also require attention to sag and surface contact during storage.
Consider single-sided placement when only one aisle face is available. A double-sided arrangement can consolidate stock in a central row, provided both faces remain accessible. Include base projections in the drawing so pedestrian paths are not measured from the upright alone.
Fit the storage route to State Street receiving
Murray building-product operations around State Street and Vine Street industrial may have limited room for delivery staging. Relating those entrances to the I-15 route helps establish where incoming lengths can wait without occupying the unloading approach. Schedule assembly deliveries around the space receiving actually uses. For Murray cantilever work, we are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997.
Four checks for a restricted footprint
Doorway approach
Trace the longest incoming bundle through the doorway and toward its assigned arms. A row that fits on paper may still prevent the truck from aligning its load.
Working elevations
Set arm levels around bundle thickness, fork clearance, and visibility. Closely spaced levels add little value if operators cannot place or retrieve the goods cleanly.
Outdoor alternatives
Moving suitable material outside may release indoor space, but exposure, drainage, ground conditions, and the proposed finish all need review before choosing that location.
Receiving sequence
Define where unloaded material waits while lengths and labels are checked. Keep that temporary position separate from a travel aisle used by other deliveries.
Use cantilever racking where open access matters
Building materials with irregular lengths often benefit from arms because there are no front posts dividing the loading face. Palletized wholesale goods generally belong in selective rack when individual pallet access is the primary requirement. Avoid converting every product family to the same storage method.
Compare a standard forklift approach with side-loader travel using your real turning constraints. The vehicle must carry the longest bundle without sweeping through adjoining work areas. Changing the handling method can alter the preferred row direction as well as the required aisle width.
Keep removal order visible when several lengths share a level. Place frequently selected material where it can be reached without first shifting unrelated bundles. Review the load schedule whenever purchasing changes pack sizes, since familiar product names can conceal different weights and support needs.
Recent Installations
Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front.
Plan Murray cantilever rack placement
Provide a floor sketch showing doors, columns, existing storage, and the area reserved for deliveries. Add photographs of your longest and deepest loads. A useful review connects support spacing with the movement needed to reach it, rather than offering an isolated row count. (801) 942-0493.
Salt Lake Pallet Rack
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
(801) 942-0493Monday - Friday: 8:00 AM - 6:00 PM
Murray cantilever racking questions
Other Storage Services in Murray
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company.
Where We Work
Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions.
Salt Lake Pallet Rack
Address
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
Phone
(801) 942-0493Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Cantilever Rack in Murray?
Call (801) 942-0493 or request a quote and we will get a layout started.