Drive-In Rack in South Jordan, UT
Drive-in rack in South Jordan can hold many pallets of relatively few SKUs while using fewer access aisles than a comparable single-deep arrangement. That makes it worth evaluating for replenishment inventory, not automatically for every product stored in a growing warehouse.
E-commerce fulfillment, healthcare distribution, and hardware operations often combine broad picking ranges with narrower bulk reserves. Treat those as separate storage problems. A large overall SKU count does not rule out deep lanes for selected products, but a high total pallet count alone does not establish that the inventory fits.
Drive-in rack selection starts with reserve behavior
Build a pallet profile for the products proposed for deep storage. Record actual SKU volumes through normal replenishment cycles, seasonal peaks, and low-stock periods. Then test lane depth against those balances so the plan reflects useful occupancy rather than a position total reached only after a large delivery.
With one entrance, storage follows LIFO handling: the most recently placed accessible pallet generally leaves first. Reserve assignments must accommodate that sequence. If healthcare batches, customer allocations, or date rules require independent selection, provide separate accessible storage or another arrangement instead of relying on operators to bypass blocked loads.
Compare pushback when reserves contain more products with smaller quantities per SKU. It keeps the truck at the aisle and separates stock into independently accessed lanes, though each lane is still LIFO. Selective positions can handle exceptions while deeper storage serves the products with sustained pallet depth.
South Jordan storage linked to fulfillment work
Near the Bangerter Highway industrial corridor and 10400 South, warehouse planning should connect reserve quantities with outbound preparation rather than treating extra positions as the only goal. Healthcare distribution may emphasize batch access while hardware fulfillment separates common reserves from a wide pick range. Since 1997, supplying and installing warehouse equipment has been part of the work of Warehouse Equipment & Supplies Co., the parent of our division.
Drive-in pallet rack equipment and load checks
Truck travel
The forklift drives on the floor inside the lane. Record chassis dimensions, turning approach, and the working space needed to enter, position a load, and reverse out.
Mast and loaded envelope
Include mast profile, attachments, load backrest, and packaging overhang. Verify clearance during lifting and placement rather than checking only the unladen truck at the opening.
Rail bearing
Pallets rest on supporting rails. Match bearing requirements to actual pallet dimensions, underside construction, condition, and loaded weight, including the placement allowances specified for the arrangement.
Entry-guide fit
Guides help align the truck chassis with the lane. Size them for the equipment and approach without confusing their guidance role with the load-carrying role of pallet rails.
Drive-thru racking for FIFO and cold-room reserves
Opposite loading and unloading ends allow pallets to move through a lane in first-in, first-out order when operating procedures maintain that direction. That differs from a single-entrance reserve block. Compare both configurations using the access area required, lane occupancy, and the actual rotation demands of the assigned inventory.
Cooler and freezer applications can benefit from reducing aisle space, but temperature does not change the need for suitable SKU depth. Confirm the truck's suitability for cold operation and review pallets, wrapping, and load stability in those conditions. Plan handling around what operators encounter inside the room.
Show reserve lanes together with receiving, replenishment staging, and the active pick area. A compact block that interrupts those movements can shift the storage problem elsewhere. Compare the total arrangement, including how partly depleted lanes are reassigned and how incoming stock reaches its designated positions without unnecessary reshuffling.
Recent Installations
Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front.
Outline the reserve stock behind your South Jordan drive-in rack layout
Send pallet counts by SKU, rotation requirements, representative load photographs, and equipment specifications. We can discuss lane assignments and alternatives before defining the installation scope. Experienced crews work to a schedule we coordinate and manage, with proposed staging areas and installation phases reviewed alongside the receiving and fulfillment activity your team needs to maintain. (801) 942-0493.
Salt Lake Pallet Rack
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
(801) 942-0493Monday - Friday: 8:00 AM - 6:00 PM
South Jordan deep-lane questions
Other Storage Services in South Jordan
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Cantilever Rack
Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company.
Where We Work
Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions.
Salt Lake Pallet Rack
Address
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
Phone
(801) 942-0493Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Drive-In Rack in South Jordan?
Call (801) 942-0493 or request a quote and we will get a layout started.