Cantilever Rack in South Jordan, UT
Cantilever rack in South Jordan supports long loads without front columns obstructing the placement face. Uprights carry projecting arms so operators can position lumber, pipe, tube, or bar across the bearing points. The arrangement works best when its dimensions follow the material and lifting method rather than a target number of storage levels.
Building materials operations should distinguish full-bundle handling from picking individual lengths before choosing row positions. A load received in straps can behave differently once opened. Plan where that change happens, how loose stock stays organized, and which routes remain available while an operator is selecting an order.
Cantilever racking matched to stock geometry
Specify arm length against the total supported load depth. Packing strips, irregular edges, and mixed bundle profiles may alter that dimension. Show the intended bearing area clearly so material is not left projecting beyond the support arrangement assumed during equipment selection.
Review rated capacity at the arm and system levels using verified load weights. The number of arms beneath a bundle does not guarantee equal weight distribution. Column spacing and material stiffness influence bearing, so the complete loading pattern needs review before positions are assigned.
Long flexible pieces can sag between supports, while short pieces may bridge too few arms to remain stable. Sort storage groups by both length and bearing needs. Sheet materials may call for added support surfaces or another handling method instead of an open-arm position.
South Jordan Parkway and Bangerter material handling
Building materials users around South Jordan Parkway and the Bangerter industrial area should map bundle movement independently from parcel or pallet dispatch. Mountain View Corridor connections can guide delivery routing, but door locations determine the internal storage approach. For South Jordan cantilever work, we are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997.
Four checks for controlled placement
Product grouping
Separate round stock, rectangular bundles, and loose lengths where their handling needs differ. A shared nominal length does not make every material suitable for the same position.
Arm openings
Allow space above each bundle for forks and controlled lowering. Filling every vertical interval can make a theoretically available position awkward to use.
Access protection
Keep staging outside the approach needed to retrieve the longest material. Empty packaging and returned lengths need assigned places rather than accumulating at row ends.
Information before purchase
Document weights, product dimensions, and planned level elevations. Review any proposed substitution against those requirements instead of accepting similar-looking parts as interchangeable.
Cantilever storage rack layout alternatives
A wall-oriented single-sided row may preserve a central travel route when the load depth and base footprint fit. Double-sided storage brings more material faces into an island but consumes access space on either side. Compare the net arrangement after drawing working aisles and row-end movements.
Use the actual forklift model to establish approach and placement room, not an aisle borrowed from another building. Consider side-loader access when long products dominate the movement pattern. Trace the loaded vehicle through receiving, turns, and withdrawal so protruding ends are included in the assessment.
Outdoor storage requires attention to exposure, finishes, and the surface supporting vehicle movement. Indoor locations may better protect sensitive material or shorten transfers to work stations. Selective rack remains appropriate for palletized goods whose packaging and retrieval needs do not call for open-front arms.
Recent Installations
Racking projects completed for warehouses across the Salt Lake City metro and Wasatch Front.
Plan South Jordan cantilever rack placement
Submit a floor sketch with doors, staging areas, and intended material groups, plus photographs showing how bundles are lifted. The cantilever rack review can then address support intervals, single-sided versus double-sided placement, and the information needed to define a suitable equipment arrangement. (801) 942-0493.
Salt Lake Pallet Rack
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
(801) 942-0493Monday - Friday: 8:00 AM - 6:00 PM
South Jordan load handling questions
Other Storage Services in South Jordan
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Forklift access inside deep storage lanes for bulk inventory, with fewer access aisles.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsWarehouse Relocation
Teardown, label, coordinate transport and reinstall rack around a reviewed layout for the next building.
View detailsNearby Areas We Also Serve
Our delivery and installation territory covers the Salt Lake City metro and Wasatch Front, so one team can handle multiple buildings for the same company.
Where We Work
Located in Salt Lake City, we serve the entire Salt Lake metro and Wasatch Front with industrial pallet racks and warehouse storage solutions.
Salt Lake Pallet Rack
Address
3556 S 5600 W
Suite #1-1293
Salt Lake City, UT 84120
Phone
(801) 942-0493Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Cantilever Rack in South Jordan?
Call (801) 942-0493 or request a quote and we will get a layout started.